Authors: Kushal Singla, Hubert Perrot, Bruce Brown, Srdjan Nešić

Journal: CORROSION 

Abstract: In the present study, a quartz crystal microbalance with dissipation monitoring (QCM-D) was used to investigate the adsorption of a model corrosion inhibitor compound, tetradecyldimethylbenzylammoniumbromide (BDA-C14), on gold electrode. Sauerbrey’s equation was used to analyze the equilibrated normalized frequency change for estimation of the adsorbed mass and adsorbed layer thickness at different bulk inhibitor concentrations after careful validation. Average adsorbed layer thickness for BDA-C14 at tested experimental conditions lie in the range of 1-1.4 nm. Time dependent part of the frequency change was analyzed using Langmuir adsorption isotherm to calculate the kinetic constants (k_A = 0.075 ± 0.02 mM⁻¹∙s⁻¹, k_D = 0.0023 ± 0.0007 s⁻¹ and K_AD = 32.2 mM⁻¹). Equilibrium surface coverage (θ_eq) was estimated at each bulk inhibitor concentration tested: 0.69 for 25 ppm(w), 0.74 for 50 ppm(w) and 0.91 for 100 ppm(w). Some theoretical calculations are also shown explaining the use of known molecular geometry and adsorption kinetics information from QCM-D analysis to reasonably speculate the predominant adsorbed layer configuration. A conscious effort is made to state and validate each assumption made for the analysis of the experimental results.

The full article can be accessed here.